Turn the furnace off and do not reset it. If you smell gas, leave the building without operating switches and contact the gas utility or emergency services from outside.
What does Ruud code 14 mean?
Ruud furnace code 14 means the control detected flame when flame should not have been present on the supported control family. Confirm the model number and diagnostic chart inside the furnace door before replacing parts.
What causes Ruud code 14?
- A gas valve leaking or stuck open
- A shorted flame-sensing circuit
- A failed integrated control board
Can I troubleshoot Ruud code 14?
Turn the furnace off and do not reset it. If you smell gas, leave the building without operating switches and contact the gas utility or emergency services from outside.
How much does Ruud code 14 cost to fix?
A gas valve replacement typically costs between $300 and $1,000 nationally.
When should I call a technician?
Turn the furnace off and call a licensed technician immediately to test the gas valve and flame-proving circuit.
Sources and model scope
Fault codes vary by model and control board. Confirm the diagnostic chart inside your furnace panel or the official manual before acting.
Scope used here: Rheem/Ruud RGFG-family controls using the documented two-digit diagnostic table.
- Rheem Manufacturing Company: RGFG Series Gas Furnace Installation Instructions and Diagnostic Codes
92-24161-104-06 · Rheem/Ruud RGFG-family furnace controls; confirm the unit model and its door chart before applying a code meaning.
Compiled by Warmlo Editorial · Reviewed August 2026
This is general information, not professional advice. Gas, electrical, and combustion repairs can be dangerous — when in doubt, call a licensed technician.